|
標準編號 |
標準名稱 |
發布部門 |
發布日期 |
狀態 |
|
SN EN 16397-2:2014 |
Flexible Couplings - Part 2: Characteristics And Testing For Metal Banded Flexible Couplings, Adaptors And Bushes |
瑞士標準化協會 |
2015-03-01 |
現行 |
|
SN EN 1366-12:2014 |
Fire Resistance Tests For Service Installations - Part 12: Non-Mechanical Fire Barrier For Ventilation Ductwork |
瑞士標準化協會 |
2015-03-01 |
現行 |
|
SN EN 13381-1:2014 |
Test Methods For Determining The Contribution To The Fire Resistance Of Structural Members - Part 1: Horizontal Protective Membranes |
瑞士標準化協會 |
2015-03-01 |
現行 |
|
SN EN 4056-004:2015 |
Aerospace Series - Cable Ties For Harnesses - Part 004: Plastic Cable Ties - For Operating Temperatures -55 Degrees C To 105 Degrees C And -55 Degrees C To 150 Degrees C - Product Standard |
瑞士標準化協會 |
2015-03-01 |
現行 |
|
SN EN 2593-001:2015 |
Aerospace Series - Bases For 10 A Electromagnetic Plug-In Relays, Two And Four Poles Double Thrown - Part 001: Technical Specification |
瑞士標準化協會 |
2015-03-01 |
現行 |
|
SN EN 16644:2015 |
Pumps - Rotodynamic Pumps - Glandless Circulators Having A Rated Power Input Not Exceeding 200 W For Heating Installations And Domestic Hot Water Installations - Noise Test Code (Vibro-Acoustics) For Measuring Structure- And Fluid-Borne Noise |
瑞士標準化協會 |
2015-03-01 |
現行 |
|
SN EN ISO 7539-10:2015 |
Corrosion Of Metals And Alloys - Stress Corrosion Testing - Part 10: Reverse U-Bend Method (Iso 7539-10:2013) |
瑞士標準化協會 |
2015-03-01 |
現行 |
|
SN EN ISO 16251-1:2014 |
Acoustics - Laboratory Measurement Of The Reduction Of Transmitted Impact Noise By Floor Coverings On A Small Floor Mock-Up - Part 1: Heavyweight Compact Floor (Iso 16251-1:2014) |
瑞士標準化協會 |
2015-03-01 |
現行 |
|
SN EN 54-31:2015 |
Fire Detection And Fire Alarm Systems - Part 31: Multi-Sensor Fire Detectors - Point Detectors Using A Combination Of Smoke, Carbon Monoxide And Optionally Heat Sensors |
瑞士標準化協會 |
2015-03-01 |
現行 |
|
SN EN 16506:2014 |
Systems For Renovation Of Drains And Sewers - Lining With A Rigidly Anchored Plastics Inner Layer (Rapl) |
瑞士標準化協會 |
2015-03-01 |
現行 |
|
SN EN ISO 22313:2015 |
Societal Security - Business Continuity Management Systems - Guidance (Iso 22313:2012) |
瑞士標準化協會 |
2015-03-01 |
現行 |
|
SN EN ISO 19901-3:2015 |
Petroleum And Natural Gas Industries - Specific Requirements For Offshore Structures - Part 3: Topsides Structure (Iso 19901-3:2014) |
瑞士標準化協會 |
2015-03-01 |
現行 |
|
SN EN ISO 10545-1:2014 |
Ceramic Tiles - Part 1: Sampling And Basis For Acceptance (Iso 10545-1:2014) |
瑞士標準化協會 |
2015-03-01 |
現行 |
|
SN EN 9103:2015 |
Aerospace Series - Quality Management Systems - Variation Management Of Key Characteristics |
瑞士標準化協會 |
2015-03-01 |
現行 |
|
SN EN 6059-502:2015 |
Aerospace Series - Electrical Cables, Installation - Protection Sleeves - Test Methods - Part 502: Resistance To Electrical Arcs |
瑞士標準化協會 |
2015-03-01 |
現行 |
|
SN EN 4550-4:2015 |
Aerospace Series - Pipe Coupling 37 Degrees - Design Configuration - Inch Series - Part 4: Female Sealing Ends |
瑞士標準化協會 |
2015-03-01 |
現行 |
|
SN EN 4550-1:2015 |
Aerospace Series - Pipe Coupling 37 Degrees - Design Configuration - Inch Series - Part 1: Male Sealing Ends, Spherical |
瑞士標準化協會 |
2015-03-01 |
現行 |
|
SN EN 374-2:2015 |
Protective Gloves Against Chemicals And Micro-Organisms - Part 2: Determination Of Resistance To Penetration |
瑞士標準化協會 |
2015-03-01 |
現行 |
|
SN EN 3716-004:2015 |
Aerospace Series - Connectors, Single-Way With Triaxial Interface For Transmission Of Digital Data - Part 004: Solder Plug And Terminator - Product Standard |
瑞士標準化協會 |
2015-03-01 |
現行 |
|
SN EN 3545-007:2015 |
Aerospace Series - Connectors, Electrical, Rectangular, With Sealed And Non-Sealed Rear, Plastic Housing, Locking Device, Operating Temperatures -55 Degrees C To 175 Degrees C - Part 007: Cable Clamp - Product Standard |
瑞士標準化協會 |
2015-03-01 |
現行 |
