|
標準編號 |
標準名稱 |
發布部門 |
發布日期 |
狀態 |
|
MS 2477-6:2012 |
Specification and qualification of welding procedures for metallic materials - Welding procedure test - Part 6: Arc and gas welding of copper and its alloys (ISO 15614-6:2006, IDT) |
馬來西亞標準局（DS.. |
2012-03-15 |
現行 |
|
MS 2477-5:2012 |
Specification and qualification of welding procedures for metallic materials - Welding procedure test - Part 5: Arc welding of titanium, zirconium and their alloys (ISO 15614-5:2004, IDT) |
馬來西亞標準局（DS.. |
2012-03-15 |
現行 |
|
MS ISO 898-7:2003 (CONFIRMED:2012) |
Mechanical properties of fasteners - Part 7: Torsional test and minimum torques for bolts and screws with nominal diameters 1 mm to 10 mm (ISO 898-7:1992, IDT) |
馬來西亞標準局（DS.. |
2012-02-14 |
現行 |
|
MS 2445:2012 |
Office panel systems - Workstations |
馬來西亞標準局（DS.. |
2012-01-06 |
現行 |
|
MS ISO 3154:2003 (CONFIRMED:2012) |
Stranded wire ropes for mine hoisting - Technical delivery requirements (ISO 3154:1988, IDT) |
馬來西亞標準局（DS.. |
2012-01-02 |
現行 |
|
MS ISO 3155:2003 (CONFIRMED:2012) |
Stranded wire ropes for mine hoisting - fibre components – characteristics and tests (ISO 3155:1976, IDT) |
馬來西亞標準局（DS.. |
2012-01-02 |
現行 |
|
MS ISO 3156:2004 (CONFIRMED:2012) |
Stranded wire ropes for mine hoisting - impregnating compounds, lubricants and service dressings - characteristics and tests (ISO 3156:1976, IDT) |
馬來西亞標準局（DS.. |
2012-01-01 |
現行 |
|
MS ISO 2415:2005 (CONFIRMED:2012) |
Forged Shackles for general lifting purposes - Dee shackles and bow shackles (ISO 2415:2005, IDT) |
馬來西亞標準局（DS.. |
2012-01-01 |
現行 |
|
MS ISO 887:2006 (CONFIRMED:2011) |
PLAIN WASHERS FOR METRIC BOLTS, SCREWS AND NUTS FOR GENERAL PURPOSE - GENERAL PLAN (ISO 887:2000, IDT) |
馬來西亞標準局（DS.. |
2011-11-23 |
現行 |
|
MS ISO 965-5:2003 (CONFIRMED:2011) |
ISO GENERAL PURPOSE METRIC SCREW THREADS - TOLERANCES - PART 5: LIMITS OF SIZES FOR INTERNAL SCREW THREADS TO MATE WITH HOT-DIP GALVANIZED EXTERNAL SCREW THREADS WITH MAXIMUM SIZE OF TOLERANCE POSITION H BEFORE GALVANIZING (ISO 965-5:1998, IDT) |
馬來西亞標準局（DS.. |
2011-11-23 |
現行 |
|
MS ISO 965-2:2003 (CONFIRMED:2011) |
ISO GENERAL PURPOSE METRIC SCREW THREADS - TOLERANCES - PART 2: LIMITS OF SIZES FOR GENERAL PURPOSE EXTERNAL AND INTERNAL SCREW THREADS - MEDIUM QUALITY (ISO 965-2:1998, IDT) |
馬來西亞標準局（DS.. |
2011-11-23 |
現行 |
|
MS ISO 965-3:2003 (CONFIRMED:2011) |
ISO GENERAL PURPOSE METRIC SCREW THREADS - TOLERANCES - PART 3: DEVIATIONS FOR CONSTRUCTIONAL SCREW THREADS (ISO 965-3:1998, IDT) |
馬來西亞標準局（DS.. |
2011-11-23 |
現行 |
|
MS ISO 965-4:2003 (CONFIRMED:2011) |
ISO GENERAL PURPOSE METRIC SCREW THREADS - TOLERANCES - PART 4: LIMITS OF SIZES FOR HOT-DIP GALVANIZED EXTERNAL SCREW THREADS TO MATE WITH INTERNAL SCREW THREADS TAPPED WITH TOLERANCE POSITION H OR G AFTER GALVANIZING (ISO 965-4:1998, IDT) |
馬來西亞標準局（DS.. |
2011-11-23 |
現行 |
|
MS ISO 4015:2006 (CONFIRMED:2011) |
HEXAGON HEAD BOLTS - PRODUCT GRADE B - REDUCED SHANK (SHANK DIAMETER = PITCH DIAMETER) (ISO 4015:1979, IDT) |
馬來西亞標準局（DS.. |
2011-11-23 |
現行 |
|
MS ISO 4026:2005 (CONFIRMED:2011) |
HEXAGON SOCKET SET SCREWS WITH FLAT POINT (ISO 4026:2003, IDT) |
馬來西亞標準局（DS.. |
2011-11-23 |
現行 |
|
MS ISO 4027:2005 (CONFIRMED:2011) |
HEXAGON SOCKET SET SCREWS WITH CONE POINT (ISO 4027:2003, IDT) |
馬來西亞標準局（DS.. |
2011-11-23 |
現行 |
|
MS ISO 4028:2005 (CONFIRMED:2011) |
HEXAGON SOCKET SET SCREWS WITH DOG POINT (ISO 4028:2003, IDT) |
馬來西亞標準局（DS.. |
2011-11-23 |
現行 |
|
MS ISO 4029:2005 (CONFIRMED:2011) |
HEXAGON SOCKET SET SCREWS WITH CUP POINT (ISO 4029:2003, IDT) |
馬來西亞標準局（DS.. |
2011-11-23 |
現行 |
|
MS ISO 4032:2007 (CONFIRMED:2011) |
HEXAGON NUTS, STYLE 1 - PRODUCT GRADES A AND B (ISO 4032:1999, IDT) |
馬來西亞標準局（DS.. |
2011-11-23 |
現行 |
|
MS ISO 4033:2007 (CONFIRMED:2011) |
HEXAGON NUTS, STYLE 2 - PRODUCT GRADES A AND B (ISO 4033:1999, IDT) |
馬來西亞標準局（DS.. |
2011-11-23 |
現行 |
