|
標準編號 |
標準名稱 |
發布部門 |
發布日期 |
狀態 |
|
I.S. EN 3219:2020 |
Aerospace series - Heat resisting nickel base alloy (NIP100HT) - Cold worked and softened - Bar and wire for continuous forging extrusion for fasteners - 3 mm ≤ D ≤ 30 |
National S.. |
2020-03-14 |
被替代 |
|
I.S. EN 3219:2020&LC:2020 |
Aerospace series - Heat resisting nickel base alloy (NIP100HT) - Cold worked and softened - Bar and wire for continuous forging extrusion for fasteners - 3 mm ≤ D ≤ 30 |
National S.. |
2020-03-14 |
現行 |
|
I.S. EN 3666:2020 |
Aerospace series - Heat resisting alloy NI-PH2601 - Solution treated and cold worked - Bar for forged fasteners - D ≤ 50 mm - 1 550 MPa ≤ Rm ≤ 1 830 MPa |
National S.. |
2020-02-04 |
現行 |
|
ASTM D2532-17 |
Standard Test Method for Viscosity and Viscosity Change After Standing at Low Temperature of Aircraft Turbine Lubricants |
American S.. |
2017-05-01 |
現行 |
|
DIN 65122 (2017-01) |
Aerospace Series - Powder For Additive Manufacturing With Powder Bed Process - Technical Delivery Specification |
German Ins.. |
2017-01-01 |
現行 |
|
ASTM D2532-16 |
Standard Test Method for Viscosity and Viscosity Change After Standing at Low Temperature of Aircraft Turbine Lubricants |
American S.. |
2016-12-01 |
被替代 |
|
ASTM D5972-16 |
Standard Test Method for Freezing Point of Aviation Fuels (Automatic Phase Transition Method) |
American S.. |
2016-06-01 |
現行 |
|
DIN 65122 (2016-06) |
Aerospace Series - Powder For Additive Manufacturing With Powder Bed Process - Technical Delivery Specification |
German Ins.. |
2016-06-01 |
被替代 |
|
ASTM D6790/D6790M-16 |
Standard Test Method for Determining Poisson's Ratio of Honeycomb Cores |
American S.. |
2016-04-01 |
現行 |
|
ASTM D5972-15 |
Standard Test Method for Freezing Point of Aviation Fuels (Automatic Phase Transition Method) |
American S.. |
2015-12-01 |
被替代 |
|
SAE AMS 4635:2015 |
Aluminum Bronze Bars, Rods, And Forgings, 87Cu - 9Al - 3Fe, Stress Relieved |
SAE Intern.. |
2015-06-18 |
現行 |
|
SAE AMS 5599:2007 (R2015) |
Nickel Alloy, Corrosion And Heat-resistant, Sheet, Strip, And Plate, 62ni - 21.5cr - 9.0mo - 3.7 Cb (nb), Solution Heat Treated |
SAE Intern.. |
2015-05-26 |
被替代 |
|
SAE AMS 5397:2015 |
Alloy Castings, Investment, Corrosion And Heat-Resistant 50Ni - 9.5Cr - 15Co - 3.0Mo - 4.8Ti - 5.5Al - 0.015B - 0.95V - 0.06Zr Vacuum Melted, Vacuum Cast, As Cast |
SAE Intern.. |
2015-05-26 |
現行 |
|
SAE AMS 3901/14:2008 (R2015) |
Yarn, Organic Fiber (para-aramid), High Modulus, 2840 (3160 D Tex) Denier, 0.6% Finish |
SAE Intern.. |
2015-04-30 |
現行 |
|
SAE AMS 3778/3:2015 |
Webbing, Woven, Nylon, 400 Pounds Force (1779 N) |
SAE Intern.. |
2015-04-15 |
現行 |
|
SAE AMS 5597:2009 (R2015) |
Nickel Alloy, Corrosion And Heat Resistant, Sheet, Strip, And Plate, 52.5ni - 19cr - 3.0mo - 5.1cb (nb) - 0.90ti - 0.50al - 18fe, Consumable Electrode Or Vacuum Induction Melted, 1950 Degrees F (1066 Degrees C) Solution Heat Treated |
SAE Intern.. |
2015-04-08 |
被替代 |
|
SAE AMS 5791:2009 (R2015) |
Cobalt Alloy, Powder, Plasma Spray, 56.5co - 25.5cr - 10.5ni - 7.5w |
SAE Intern.. |
2015-04-08 |
現行 |
|
SAE AMS 5888:2009 (R2015) |
Nickel Alloy, Corrosion And Heat-resistant, Plate, 54ni - 22cr - 12.5co - 9.0mo - 1.2al, Annealed |
SAE Intern.. |
2015-04-08 |
現行 |
|
SAE AMS 4824:2015 |
Bearings, Babbitt-Coated Leaded-Bronze Steel Back |
SAE Intern.. |
2015-04-07 |
現行 |
|
SAE AMS 4508:2000 (R2015) |
Copper-Zinc Alloy, Laminated Sheet, 70Cu - 30Zn, Surface Bonded |
SAE Intern.. |
2015-03-26 |
現行 |
