當前位置： 首頁 > 標準詳情頁

NF EN 792-5:2000被替代

Hand-held Non-electric Power Tools - Safety Requirements - Part 5: Rotary Percussive Drills

出版：Association Francaise de Normalisation

獲取原文如何獲取原文？問客服獲取原文，即可享受本標準狀態變更提醒服務！

專家解讀視頻

基本信息

標準編號： NF EN 792-5:2000

發布時間：2000/9/1 0:00:00

標準類別：Standard

出版單位：Association Francaise de Normalisation

標準頁數：26

標準簡介

Applicable to hand-held non-electric power tools driven by linear or rotary motors, powered by compressed air, hydraulic fluid and intended to be used by one operator and supported by the operator's hand or hands; a harness or a suspension, e.g a balancer. Applicable to hand-held non-electric, power tools used for making holes in hard materials like rock and concrete. Lists significant hazards caused by such power tools and defines safety requirements valid for different aspects of safety during their foreseeable lifetime. Power tools covered by this part of the standard: plug hole drills; rock drills; rotary hammers. Annex C deals with safety requirements related to power tools driven by an internal combustion engine.

標準備注

Indice de classement: E65-100-5. (05/2003) 2000 Edition Re-issued in November 2008 & incorporates AMD 1 2008. (11/2008)

替代本標準的新標準

NF EN ISO 11148-5:2012

等同采用的國際標準

NEN EN 792-5:2000 - Identical

SS EN 792-5:2000 - Identical

UNE EN 792-5:2001 - Identical

NS EN 792-5:2000 - Identical

I.S. EN 792-5:2000 - Identical

UNI EN 792-5:2002 - Identical

NBN EN 792-5:2000 - Identical