ISO 17643:2015 defines eddy current testing techniques for detection of surface breaking and near surface planar discontinuities, mainly in ferritic materials (weld material, heat-affected zones, base material). Eddy current testing can also be specified for use with non-ferritic materials, for example in an application standard. The techniques can be applied to coated and uncoated objects during fabrication and in service, both onshore and offshore. Eddy current testing can be carried out on all accessible surfaces and on welds of almost any configuration. Unless otherwise specified at specific items in this International Standard, the general principles of ISO 15549 apply. NOTE Eddy current testing is usually performed in the as-welded condition. However, the accuracy of the results can be affected by very rough surface finishes.

ISO 17643:2005

AS ISO 17643:2020 -

I.S. EN ISO 17643:2015 - Identical

DIN EN 1711 E : 2000 - Identical

DIN EN 1711 : 2000 - Identical

UNE EN ISO 17643 : 2016 - Identical

UNI EN ISO 17643 : 2015 - Identical

NF EN ISO 17643 : 2015 - Identical

SS-EN ISO 17643:2015 - Identical

NS EN ISO 17643 : 2015 - Identical

PN EN ISO 17643 : 2015 - Identical

DIN EN ISO 17643 : 2015 - Identical

DIN EN ISO 17643 E : 2015 - Identical

DS EN ISO 17643 : 2015 - Identical

BS EN ISO 17643 : 2015 - Identical

NEN EN ISO 17643 : 2015 - Identical

SN EN ISO 17643 : 2015 - Identical

NBN EN ISO 17643 : 2015 - Identical