當前位置： 首頁 > 標準詳情頁

IEC 60695-11-20 Ed. 1.1被替代

Fire hazard testing Part 11-20: Test flames - 500 W flame test methods

出版：International Electrotechnical Committee

獲取原文如何獲取原文？問客服獲取原文，即可享受本標準狀態變更提醒服務！

專家解讀視頻

基本信息

標準編號： IEC 60695-11-20 Ed. 1.1

發布時間：2003/8/14 0:00:00

標準類別：Standard

出版單位：International Electrotechnical Committee

標準頁數：39

標準簡介

Specifies a small-scale laboratory screening procedure for comparing the relative burning behaviour of specimens made from plastics and other non-metallic materials, as well as their resistance to burn-through when exposed to a flame ignition source of 500 W nominal power. This method is applicable to both solid materials and cellular plastic materials having an apparent density of 250 kg/m3 or greater when determined in accordance with ISO 845. It does not apply to thin materials that shrink away from the applied flame without igniting, for which ISO 9773 should be used. The test method described is intended to characterize material performance, for example for quality-control purposes, and is not intended to assess the behaviour to fire of building materials or furnishings. It may be used for the pre-selection of a material, provided that positive results are obtained at a thickness which equals the smallest thickness used in the application. The results obtained provide some information about the behaviour of plastic materials in service, but can never by themselves assure safe performance in service. This test method provides a classification system which may be used for quality assurance or the pre-selection of component materials of products. Has the status of a basic safety publication in accordance with Guide 104. The contents of the corrigendum of February 2000 have been included in this copy. This consolidated version consists of the first edition (1999) and its amendment 1 (2003). Therefore, no need to order amendment in addition to this publication.

本標準替代的舊標準

ISO 10351:1992

ISO 1210:1992

IEC 61300-2-36 Ed. 1.0

IEC 60695-11-20 Ed. 1.0

替代本標準的新標準

IEC 60695-11-20 Ed. 2.0

等同采用的國際標準

UNE EN 60695-11-20:2000 - Identical

CEI EN 60695-11-20:2000 - Identical

SN EN 60695-11-20:1999 - Identical

BS EN 60695-11-20:1999 - Equivalent