IEC 61000-4-4 Ed. 2.0被替代
Electromagnetic compatibility (EMC) Part 4-4: Testing and measurement techniques - Electrical fast transient/burst immunity test
出版：International Electrotechnical Committee
專家解讀視頻
Establishes a common and reproducible reference for evaluating the immunity of electrical and electronic equipment when subjected to electrical fast transient/bursts on supply, signal, control and earth ports. The test method documented in this part of IEC 61000-4 describes a consistent method to assess the immunity of an equipment or system against a defined phenomenon. The standard defines: - test voltage waveform; - range of test levels; - test equipment; - verification procedures of test equipment; - test set-up; - test procedure. The standard gives specifications for laboratory and post-installation tests. The contents of the corrigenda of August 2006 and July 2007 have been included in this copy. This English-language version is derived from the original bilingual publication by leaving out all French-language pages. Missing page numbers correspond to the French-language pages.
NEN EN IEC 61000-4-4:2005 - Identical
AS/NZS 61000.4.4:2006 - Identical
PN EN 61000-4-4:2005 - Identical
CSA CEI/IEC 61000.4.4:2006 (R2011) - Identical
I.S. EN 61000-4-4:2004 - Identical
NBN EN 61000 4-4:2005 - Identical
VDE 0847-4-4:2005 - Identical
SN EN 61000-4-4:1995 - Identical
SN EN 61000-4-4:2004 - Identical
CSA CEI/IEC 61000.4.4B:2003 - Identical
JIS C 61000-4-4:2007 - Identical
NEN 11000-4-4:1995 - Identical
UNE EN 61000-4-4:2005 - Identical
BS EN 61000-4-4:2004+A1:2010 - Identical
SS EN 61000-4-4 Ed. 2 (2005) - Identical
NF EN 61000-4-4:2005 - Identical
CEI EN 61000-4-4 Ed. 2 (2006) - Identical
OVE/ONORM EN 61000-4-4:2005 - Identical
BS EN 61000-4-4:2004 - Identical
DIN EN 61000-4-4 (2005-07) - Identical
