IEC 60296 Ed. 3.0被替代
Fluids for electrotechnical applications - Unused mineral insulating oils for transformers and switchgear
出版：International Electrotechnical Committee
專家解讀視頻
Covers specifications and test methods for unused mineral insulating oils. It applies to oil delivered to the agreed point and time of delivery, intended for use in transformers, switchgear and similar electrical equipment in which oil is required as an insulant and for heat transfer. These oils are obtained by distillation and refining of crude petroleum. Oils with and without additives are both within the scope of this standard. This standard is applicable only to unused mineral insulating oils. Reclaimed oils are beyond the scope of this standard. This standard does not apply to mineral oils used as impregnants in cables or capacitors. NOTE Mineral insulating oils complying with the requirements of this standard, of the same class and containing no additives (see 3.4), are considered to be compatible with one another and can be mixed in any proportion. This does not apply to oils containing additives. Where the user wishes to mix such oils, a check is recommended to be made to ensure that the mixture meets the requirements of this standard. Main changes with regard to previous edition include: the three classes of previous edition have been replaced by only two: transformer oil and low temperature switchgear oil, but a new concept, the lowest cold start energizing temperature, has been included; new properties have been added (i.e. charging tendency); values for properties have been revised.
CEI EN 60296 Ed. 9 (2004) - Identical
BS EN 60296:2004 - Identical
DIN EN 60296 (2005-01) - Identical
VDE 0370-1:2005 - Identical
NF EN 60296:2004 - Identical
I.S. EN 60296:2004 - Identical
PN EN 60296:2007 - Identical
SS EN 60296 Ed. 1 (2004) - Identical
UNE EN 60296:2004 - Identical
NEN EN IEC 60296:2004 - Identical
OVE/ONORM EN 60296:2005 - Identical
