當前位置： 首頁 > 標準詳情頁

IEC 61557-1 Ed. 2.0現行

Electrical safety in low voltage distribution systems up to 1 000 V a.c. and 1 500 V d.c. - Equipment for testing, measuring or monitoring of protective measures Part 1: General requirements

出版：International Electrotechnical Committee

獲取原文如何獲取原文？問客服獲取原文，即可享受本標準狀態變更提醒服務！

專家解讀視頻

基本信息

標準編號： IEC 61557-1 Ed. 2.0

發布時間：2007/1/29 0:00:00

標準類別：Standard

出版單位：International Electrotechnical Committee

標準頁數：33

標準簡介

This part of IEC 61557 specifies the general requirements for measuring and monitoring equipment for testing the electrical safety in low voltage distribution systems with nominal voltages up to 1 000 V a.c. and 1 500 V d.c. When measuring equipment or measuring installations involve measurement tasks of various measuring equipment covered by this series of standards, then the part of this series of standards relevant to each of the measurement tasks is applicable. This second edition replaces and cancels the first edition published in 1997. It constitutes a technical revision. The following changes were made with respect to the previous edition: a) revision of the definitions; b) addition of influence quantities E9 and E10; c) the subclause on Electromagnetic compatibility was complemented; d) inclusion of performance monitoring devices in the introduction; e) addition of new requirements for operating instructions.

本標準替代的舊標準

IEC 61557-1 Ed. 1.0

等同采用的國際標準

VDE 0413-1:2007 - Identical

BS EN 61557-1:2007 - Identical

NEN EN IEC 61557-1:2007 - Identical

OVE/ONORM EN 61557-1:2008 - Identical

PN EN 61557-1:2007 - Identical

DIN EN 61557-1 (2007-12) - Identical

GOST R IEC 61557-1:2005 - Identical

SS EN 61557-1 Ed. 1 (1998) - Identical

CEI EN 61557-1 Ed. 2 (2008) - Identical