ISO 6103:2005被替代
Bonded abrasive products - Permissible unbalances of grinding wheels as delivered - Static testing
出版：International Organization for Standardization
專家解讀視頻
ISO 6103:2005 specifies the maximum permissible values of unbalances for various grinding wheels of ISO 603-1 to ISO 603-9 and ISO 603-12 to ISO 603-16 in the as-delivered condition, with an outside diameter greater than 115 mm and maximum operating speed greater than or equal to 16 m/s. It also specifies the method for measuring the unbalance and the practical method for testing whether a grinding wheel is acceptable or not.ISO 6103:2005 is applicable to bonded abrasive grinding wheels in the as-delivered condition. It is not applicable to diamond, cubic boron nitride or natural stone grinding wheels, or centreless control wheels, lapping and disc wheels, ball wheels or glass grinding wheels.
BS 4481-3:1988 - Identical
JIS R 6243:2003 - Identical
ONORM ISO 6103:1990 - Identical
UNI ISO 6103:1991 - Identical
NS EN ISO 6103 Ed. 2 (2005) - Identical
DIN V 69106 (1988-07) - Similar
UNI EN ISO 6103:2005 - Identical
NEN EN ISO 6103:2005 - Identical
AS 4820-2006 - Identical
NBN EN ISO 6103:2005 - Identical
I.S. EN ISO 6103:2005 - Identical
SS EN ISO 6103 Ed. 2 (2005) - Identical
SS ISO 6103:1988 - Identical
SN EN ISO 6103:2000 - Identical
BS EN ISO 6103:2005 - Identical
DIN EN ISO 6103 (2005-07) - Identical
ONORM EN ISO 6103:2005 - Identical
NF EN ISO 6103:2005 - Identical
PN EN ISO 6103:2006 - Identical
NBR ISO 6103:2007 - Identical
