當前位置： 首頁 > 標準詳情頁

NEN EN 1870-14:2008現行

Safety Of Woodworking Machines - Circular Sawing Machines - Part 14: Vertical Panel Sawing Machines

出版：Nederlands Normalisatie Instituut

獲取原文如何獲取原文？問客服獲取原文，即可享受本標準狀態變更提醒服務！

專家解讀視頻

基本信息

標準編號： NEN EN 1870-14:2008

發布時間：2008/1/1 0:00:00

標準類別：Standard

出版單位：Nederlands Normalisatie Instituut

標準頁數：61

標準簡介

Defines all significant hazards, hazardous situations and events which are relevant to manually loaded and unloaded vertical panel sawing (with or without integrated feed) machines fitted with: - the facility for scoring; - an angle cutting device; - a middle support device; - a programmable stop for parallel vertical cuts; - the facility for grooving with a width of at most 20 mm in one pass by using a milling tools, hereinafter referred to as "machines" when they are used as intended and under the conditions foreseen by the manufacturer including reasonably foreseeable misuse.

標準備注

Supersedes NEN EN 1870-2. (02/2008) 2008 Edition Re-Issued in April 2012 & incorporates AMD 2 2012. (05/2012)

本標準替代的舊標準

NEN EN 1870-14:2006

NEN EN 1870-2:1999

等同采用的國際標準

BS EN 1870-14:2007+A2:2012 - Identical

I.S. EN 1870-14:2007 - Identical

DIN EN 1870-14 (2008-03) - Identical

NF EN 1870-14:2008 - Identical

NBN EN 1870-14:2008 - Identical

NS EN 1870-14:2007 - Identical