IEC 61000-3-2 Ed. 3.0被替代
Electromagnetic compatibility (EMC) Part 3-2: Limits - Limits for harmonic current emissions (equipment input current ≤ 16 A per phase)
出版：International Electrotechnical Committee
專家解讀視頻
Deals with the limitation of harmonic currents injected into the public supply system. Specifies limits of harmonic components of the input current which may be produced by equipment tested under specified conditions. Harmonic components are measured according to Annexes A and B. This part of IEC 61000 is applicable to electrical and electronic equipment having an input current up to and including 16 A per phase, and intended to be connected to public low voltage distribution systems. Arc welding equipment which is not professional equipment, with input current up to and including 16 A per phase, is included in this standard. Arc welding equipment intended for professional use, as specified in IEC 60974-1, is excluded from this standard and may be subject to installation restrictions as indicated in IEC 61000-3-4 or IEC 61000-3-12. The tests according to this standard are type tests. Test conditions for particular equipment are given in Annex C.
PN EN 61000-3-2:2007 - Identical
I.S. EN 61000-3-2:2006 - Identical
NEN EN IEC 61000-3-2:2006 - Identical
BS EN 61000-3-2:2006 - Identical
OVE/ONORM EN 61000-3-2:2006 - Identical
CEI EN 61000-3-2 Ed. 4 (2007) - Identical
AS/NZS 61000.3.2:2007 - Modified
DIN EN 61000-3-2 (2006-10) - Identical
NF EN 61000-3-2:2006 - Identical
UNE EN 61000-3-2:2006 - Identical
BS EN 61000-3-2:2006+A2:2009 - Identical
VDE 0838-2:2006 - Identical
JIS C 61000-3-2:2005 - Identical
SN EN 61000-3-2:2006 - Identical
