ISO 10791-8 : 2001(R2017)現行
TEST CONDITIONS FOR MACHINING CENTRES - PART 8: EVALUATION OF CONTOURING PERFORMANCE IN THE THREE COORDINATE PLANES
出版：International Organization for Standardization
專家解讀視頻
Provides a method of checking the contouring performance of machining centres by conducting circular tests in three coordinate planes (XY, YZ AND XZ) and by evaluating the radial deviation, F, and circular deviation, G, in accordance with ISO 230-4. Purpose of checks by circular tests is to verify the circular movement only in one position per coordinate plane of the machine, at only one feed rate, to repeat the test once in the opposite contouring direction.
IS 15250 : Part 8 : 2018 - Identical
IS 15250 : Part 1 : 2018 - Identical
SN ISO 10791-8 : 2001 - Identical
NEN ISO 10791-8 : 2001 - Identical
NBR NM-ISO 10791-8 : 2004 - Identical
IS 15250 : Part 1 : 2018 - Identical
NF ISO 10791-8 : 2001 - Identical
IS 15250 : Part 8 : 2018 - Identical
NEN ISO 10791-8 : 2001 - Identical
BS ISO 10791-8 : 2001 - Identical
NBR NM-ISO 10791-8 : 2004 - Identical
NF ISO 10791-8 : 2001 - Identical
BS ISO 10791-8 : 2001 - Identical
