當前位置： 首頁 > 標準詳情頁

IEC 60095-2 Ed. 3.0被替代

Lead-acid starter batteries. Part 2: Dimensions of batteries and dimensions and marking of terminals

出版：International Electrotechnical Committee

獲取原文如何獲取原文？問客服獲取原文，即可享受本標準狀態變更提醒服務！

專家解讀視頻

基本信息

標準編號： IEC 60095-2 Ed. 3.0

發布時間：1984/9/30 0:00:00

標準類別：Standard

出版單位：International Electrotechnical Committee

標準頁數：14

標準簡介

Applies to lead-acid batteries used for starting, lighting and ignition of passenger automobiles and light commercial vehicles with a nominal voltage of 12 V fastened to the vehicles by means of ledges on the long sides of the battery case, two alternative admissible means are specified in Section Three. Specifies: -the main dimensions of starter batteries of four standard series; -the location of the positive and negative terminals with respect to the fastening system; -the dimensions of tapered terminals of starter batteries; -the marking of the polarity.

替代本標準的新標準

IEC 60095-2 Ed. 4.0

等同采用的國際標準

SS EN 60095-2:1993 - Identical

UNE EN 60095-2:1997 - Identical

NF EN 60095-2:1993 - Similar

GOST R IEC 95-2:1993 - Identical

I.S. EN 60095-2:1994 - Identical

BS EN 60095-2:1993 - Similar

DIN EN 60095-2 (1994-04) - Identical

JIS D 5301:2006 - Equivalent

NEN EN 60095-2:1995 - Identical