1.1 This International Standard specifies requirements for low-pressure hose assemblies intended for use with the following medical gases:oxygen; nitrous oxide; air for breathing; helium; carbon dioxide; xenon; specified mixtures of the gases listedabove; air for driving surgical tools; nitrogen for driving surgical tools; nitric oxide/nitrogen mixtures; vacuum.It is intended in particular to ensuregas-specificity and to prevent cross-connection between systems conveying different gases.These hose assemblies are intended to be used at pressures less than 1 400 kPa.1.2 This International Standard specifies the allocation of non-interchangeable screw-threaded (NIST)connectors and diameter-index safety system (DISS)connectors to medical gases and specifies the dimensions of non-interchangeable screw-threaded (NIST) connectors.1)1.3 This International Standard does not specify: requirements for coaxial hosesused forthe supply and disposal of air fordriving surgical tools; requirements for electrical conductivity.1.4 This International Standard does not specify the intended uses of hose assemblies.NOTE Some examples of intended use specified in other International Standards are as follows: a) between a terminal unit and medical equipment (ISO 9170-1, ISO 8835-1, ISO 10651-1); b) between the fixed pipeline system and a terminal unit of that system (ISO 7396-1, ISO 11197); c) between a terminal unit and a second terminal unit (ISO 7396-1);d) between an emergency supply and an emergency and maintenance inlet point of a pipeline system (ISO 10524, ISO 7396-1);e) between an emergency supply and medical equipment (ISO 10524, ISO 8835-1, ISO 10651-1).

ISO 5359:1989

ISO 5359:2008

NEN ISO 5359:2000 - Identical

AS 2902-2005 (R2016) - Identical

CSA Z5359:2004 (R2009) - Identical

BS 5682:1984 - Similar

JIS T 7111:2006 - Equivalent