當前位置： 首頁 > 標準詳情頁

UNI EN ISO 140-8:1999被替代

Acoustics - Measurement Of Sound Insulation In Buildings And Building Elements - Laboratory Measurements Of The Reduction Of Transmitted Impact Noise By Floor Coverings On A Heavyweight Standard Floor

出版：Italian Standards

獲取原文如何獲取原文？問客服獲取原文，即可享受本標準狀態變更提醒服務！

專家解讀視頻

基本信息

標準編號： UNI EN ISO 140-8:1999

標準類別：Standard

出版單位：Italian Standards

標準頁數：0

標準簡介

Defines a procedure for measurement of the acoustic properties of floor coverings from the view-point of reduction of impact noise transmission. Defines a procedure for determination of the noise reducing value of a floor covering under standard test conditions. This test is limited to the definition of methods for the physical measurement of sound originating from an artificial source (standard tapping machine) under laboratory conditions and is not directly related to the subjective significance of the results. Applies to all floor coverings, both single- or multi-layered, as installed on a standard floor. Multi-layered coverings can be factory- or test-site- assembled. Does not provide for allowing the assessing of effectiveness of a floor covering in situ.

標準備注

Replaces UNI 8270-8

替代本標準的新標準

UNI EN ISO 10140-1:2010

UNI EN ISO 10140-3:2010

UNI EN ISO 10140-4:2010

UNI EN ISO 10140-2:2010

UNI EN ISO 10140-5:2010

等同采用的國際標準

SN EN ISO 140-8:1997 - Identical

NEN EN ISO 140-8:1997 - Identical

BS EN ISO 140-8:1998 - Identical