當前位置： 首頁 > 標準詳情頁

IEC 61140 Ed. 3.0被替代

Protection against electric shock - Common aspects for installation and equipment

出版：International Electrotechnical Committee

獲取原文如何獲取原文？問客服獲取原文，即可享受本標準狀態變更提醒服務！

專家解讀視頻

基本信息

標準編號： IEC 61140 Ed. 3.0

發布時間：2001/10/10 0:00:00

標準類別：Standard

出版單位：International Electrotechnical Committee

標準頁數：42

標準簡介

Applies to the protection of persons and animals against electric shock. It is intended to give fundamental principles and requirements which are common to electrical installations, systems and equipment or necessary for their co-ordination. Prepared for installations, systems and equipment without a voltage limit. NOTE - There are some clauses in this standard which refer to low-voltage and high-voltage systems, installations and equipment. For the purpose of this standard, low-voltage is any rated voltage up to and including 1 000 V a.c. or 1 500 V d.c. High voltage is any rated voltage exceeding 1 000 V a.c. or 1 500 V d.c. The requirements of this standard apply only if they are incorporated, or are referred to, in the relevant standards. It is not intended to be used as a stand-alone standard. Has the status of a basic safety publication in accordance with IEC Guide 104. This English-language version is derived from the original bilingual publication by leaving out all French-language pages. Missing page numbers correspond to the French-language pages.

本標準替代的舊標準

IEC 60536-2 Ed. 1.0

IEC 61140 Ed. 2.0

IEC 60536 Ed. 1.0

替代本標準的新標準

IEC 61140 Ed. 3.1

IEC 61140 Ed. 4.0

等同采用的國際標準

NF EN 61140:2002 - Identical

GOST R IEC 61140:2000 - Identical

I.S. EN 61140:2002 - Identical

CEI EN 61140:2004 - Identical