IEC 62841-3-10:2015現行
ELECTRIC MOTOR-OPERATED HAND-HELD TOOLS, TRANSPORTABLE TOOLS AND LAWN AND GARDEN MACHINERY - SAFETY - PART 3-10: PARTICULAR REQUIREMENTS FOR TRANSPORTABLE CUT-OFF MACHINES
出版：International Electrotechnical Committee
專家解讀視頻
This clause of Part 1 is applicable, except as follows: Addition: This part of IEC 62841 applies to transportable cut-off machines intended to cut materials such as metals, concrete and masonry and to be fitted with one abrasive – bonded reinforced wheel of Type 41, or – diamond cut-off wheel with the peripheral gaps, if any, not exceeding 10 mm and with – a rated no-load speed not exceeding a peripheral speed of the wheel of 100 m/s with the maximum wheel diameter and – a wheel diameter range of 250 mm to 410 mm.
VDE 0740-3-10 : 2018-08 - Identical
NEN-EN-IEC 62841-3-10 : 2016 - Identical
EN 62841-3-10 : 2015 - Identical
DS/EN 62841-3-10 : 2015 - Identical
DS/EN 62841-3-10 : 2015 - Identical
EN 62841-3-10 : 2015 - Identical
VDE 0740-3-10 : 2018-08 - Identical
NF EN 62841-3-10 : 2015 - Identical
NEN-EN-IEC 62841-3-10 : 2016 - Identical
AS/NZS 62841.3.10:2017 - Identical
DIN EN 62841-3-10 : 2018-08 - Identical
DIN EN 62841-3-10 : 2018-08 - Identical
NF EN 62841-3-10 : 2015 - Identical
