This part of IEC 62132 provides general information and definitions on measurement of conducted and radiated electromagnetic immunity of integrated circuits (ICs) to conducted and radiated disturbances. It also provides a description of measurement conditions, test equipment and set-up, as well as the test procedures and content of the test reports. A test method comparison table is included in Annex A to assist in selecting the appropriate measurement method(s). This standard describes general conditions required to obtain a quantitative measure of immunity of ICs in a uniform testing environment. Critical parameters that are expected to influence the test results are described. Deviations from this standard are noted explicitly in the individual test report. The measurement results can be used for comparison or other purposes. Measurement of the injected voltages and currents, together with the responses of the ICs tested at controlled conditions, yields information about the potential immunity of the IC to conducted and radiated RF disturbances in a given application.

IEC 62132-1 Ed. 2.0

SN EN 62132-1:2006 - Identical

BS EN 62132-1:2006 - Identical

DIN EN 62132-1 (2006-06) - Identical

NF EN 62132-1:2006 - Identical

I.S. EN 62132-1:2006 - Identical

PN EN 62132-1:2006 - Identical

SS EN 62132-1 Ed. 1 (2006) - Identical

EN 62132-1:2006 - Identical

OVE/ONORM EN 62132-1:2006 - Identical

NEN EN IEC 62132-1:2006 - Identical

CEI EN 62132-1 Ed. 1 (2006) - Identical