IEC 60695-11-10 Ed. 1.1被替代
Fire hazard testing Part 11-10: Test flames - 50 W horizontal and vertical flame test methods
出版：International Electrotechnical Committee
專家解讀視頻
Specifies a small-scale laboratory screening procedure for comparing the relative burning behaviour of vertically or horizontally oriented specimens made from plastic and other non-metallic materials, exposed to a small-flame ignition source of 50 W nominal power. These test methods determine the linear burning rate and the afterflame/afterglow times, as well as the damaged length of specimens. Applicable to solid and cellular materials that have an apparent density of not less than 250 kg/m3, determined in accordance with ISO 845. They do not apply to materials that shrink away from applied flame without igniting; ISO 9773 should be used for thin flexible materials. The test methods described provide classification systems which may be used for quality assurance, or the pre-selection of component materials of products. May be used for the pre-selection of a material, providing positive results are obtained at a thickness equal to the smallest thickness used in the application. Has the status of a basic safety publication in accordance with Guide 104. This consolidated version consists of the first edition (1999) and its amendment 1 (2003). Therefore, no need to order amendment in addition to this publication.
PN EN 60695-11-10:2002 - Identical
AS/NZS 60695.11.10:2001 - Identical
I.S. EN 60695-11-10:1999 - Identical
SS EN 60695-11-10:2001 - Identical
CEI EN 60695-11-10:2000 - Identical
SN EN 60695-11-10:1999 - Identical
NF EN 60695-11-10:2000 - Identical
VDE 0471-11-10:2004 - Identical
OVE/ONORM EN 60695-11-10:2000 - Identical
DIN EN 60695-11-10 (2004-05) - Identical
JIS Z 2391:1999 - Identical
JIS C 60695-11-10:2006 - Identical
BS EN 60695-11-10:1999 - Equivalent
NEN EN IEC 60695-11-10:1999 - Identical
UNE EN 60695-11-10:2000 - Identical
