ISO 580:2005 specifies two methods for assessing the effects of heating on injection-moulded thermoplastics pipe fittings - method A, using an air oven, and method B, using a liquid bath. In case of disagreement, method A is the reference method. ISO 580:2005 is applicable to cement-welded fittings as well as to flanged fittings and fittings incorporating elastomeric seals and to fittings consisting of the assembly of several moulded parts (e.g. union connectors). It is applicable to both pressure and non-pressure fittings.

ISO/DIS 580

ISO 2043:1974

ISO 580:1990

ISO/DIS 580 : 60.00 (2005)

ISO 2043 : 1974

ONORM EN ISO 580:2005 - Identical

NEN EN ISO 580:2005 - Identical

SS EN ISO 580 Ed. 1 (2005) - Identical

UNE EN ISO 580:2005 - Identical

PN EN ISO 580:2006 - Identical

NS EN ISO 580 Ed. 1 (2005) - Identical

UNI EN ISO 580:2005 - Identical

I.S. EN ISO 580:2005 - Identical

NF EN ISO 580:2005 - Identical

NBN EN ISO 580:2005 - Identical

BS EN 763:1995 - Similar

DIN EN ISO 580 (2005-05) - Identical

BS EN ISO 580:2005 - Identical

SN EN ISO 580:2005 - Identical

SNV ISO 580:1990 - Identical

NFT 54 029:1981 - Equivalent

BS 2782-11.1103A&B:1995 - Similar

BS 2782-11 Method 1103A:1982 - Similar

SANS 51 : 2ED 2008(R2014) - Identical

GOST R ISO 580 : 2008 - Identical

DS EN ISO 580 : 2005 - Identical

PN EN ISO 580 : 2006 - Identical

SNV ISO 580 : 1990 - Identical

BS 2782-11.1103A&B(1995) : 1995 - Similar to

BS 2782-11.1103A(1982) : 1982 - Similar to