當前位置： 首頁 > 標準詳情頁

ISO 3951-1:2013現行

Sampling procedures for inspection by variables Part 1: Specification for single sampling plans indexed by acceptance quality limit (AQL) for lot-by-lot inspection for a single quality characteristic and a single AQL

出版：International Organization for Standardization

獲取原文如何獲取原文？問客服獲取原文，即可享受本標準狀態變更提醒服務！

專家解讀視頻

基本信息

標準編號： ISO 3951-1:2013

發布時間：2013/8/27 0:00:00

標準類別：Standard

出版單位：International Organization for Standardization

標準頁數：92

標準簡介

This part ofISO3951is primarily designed for use under the following conditions:a)where the inspection procedure is to be applied to a continuing series of lots of discrete products all supplied by one producer using one production process;b)where only a single quality characteristic,x, of these products is taken into consideration, which must be measurable on a continuous scale;c)where production is stable (under statistical control) and the quality characteristic,x, is distributed according to a normal distribution or a close approximation to the normal distribution;d)where a contract or standard defines a lower specification limit,L, an upper specification limit,U, or both; an item is qualified as conforming if and only if its measured quality characteristic,x,satisfies the appropriate one of the following inequalities:1)x≥L(i.e. the lower specification limit is not violated);2)x≤U(i.e. the upper specification limit is not violated);3)x≥Landx≤U(i.e. neither the lower nor the upper specification limit is violated).

本標準替代的舊標準

ISO 3951-1:2005

ISO/DIS 3951-1 : 60.00 (2013)

ISO 3951-1 : 2005

ISO 3951 : 1989

等同采用的國際標準

NEN ISO 3951-1 : 2005 - Identical

BS ISO 3951-1 : 2013 - Identical

DS ISO 3951-1 : 2013 - Identical

NBN ISO 3951-1 : 2005 - Identical

SANS 3951-1 : 1ED 2008 - Identical

DIN ISO 3951-1 : 2016 - Identical