當前位置： 首頁 > 標準詳情頁

IEC 60317-22 Ed. 3.0現行

Specifications for particular types of winding wires Part 22: Polyester or polyesterimide enamelled round copper wire overcoated with polyamide, class 180

出版：International Electrotechnical Committee

獲取原文如何獲取原文？問客服獲取原文，即可享受本標準狀態變更提醒服務！

專家解讀視頻

基本信息

標準編號： IEC 60317-22 Ed. 3.0

發布時間：2004/8/24 0:00:00

標準類別：Standard

出版單位：International Electrotechnical Committee

標準頁數：17

標準簡介

Specifies the requirements of enamelled round copper winding wire of class 180 with a dual coating. The underlying coating is based on polyester or polyesterimide resin, which may be modified providing it retains the chemical identity of the original resin and meets all specified wire requirements. The superimposed coating is based on polyamide resin. Class 180 is a thermal class that requires a minimum temperature index of 180 and a heat shock temperature of at least 200°C. The temperature in degrees Celsius corresponding to the temperature index is not necessarily that at which it is recommended that the wire be operated and this will depend on many factors, including the type of equipment involved. The range of nominal conductor diameters covered by this standard is as follows: - grade 1: 0,050 mm up to and including 3,150 mm; - grade 2: 0,050 mm up to and including 5,000 mm; - grade 3: 0,250 mm up to and including 1,600 mm. The nominal conductor diameters are specified in Clause 4 of IEC 60317-0-1. The main changes with respect to the previous edition are listed below: - new requirements for appearance, Subclause 3.2, added; - breakdown voltage values, former Table 3, replaced with a reference to IEC 60317-0-1; - new pin hole test, Clause 23, added.

本標準替代的舊標準

IEC 60317-22 Ed. 2.0

替代本標準的新標準

IEC 60317-22 Ed. 3.1

等同采用的國際標準

SS EN 60317 Ed. 1 (1995) - Similar

NEN 10317-22:1995 - Similar

HD 555.22:1992 - Similar

ONORM OVE EN 60317-22:1995 - Identical

NFC 31 672:1988 - Similar

SS EN 60317-22 Ed. 2 (2004) - Identical

DIN EN 60317-22 (2005-05) - Equivalent