當前位置： 首頁 > 標準詳情頁

SN EN ISO 898-5:1999被替代

Mechanical Properties Of Fasteners Made Of Carbon Steel And Alloy Steel - Part 5: Set Screws And Similar Threaded Fasteners Not Under Tensile Stresses

出版：Swiss Standards

獲取原文如何獲取原文？問客服獲取原文，即可享受本標準狀態變更提醒服務！

專家解讀視頻

基本信息

標準編號： SN EN ISO 898-5:1999

發布時間：1999/3/1 0:00:00

標準類別：Standard

出版單位：Swiss Standards

標準頁數：0

標準簡介

Defines the mechanical properties of set screws and similar threaded fasteners not under tensile stresses, having nominal thread diameters between 1.6 mm and 24 mm inclusive, made from carbon steel or alloy steel. Applicable for testing at an ambient temperature between 10 and 35 deg C, which will vary at higher or lower temperatures. Not applicable to set screws requiring special properties, eg specified tensile stresses, weldability, corrosion resistance and ability to withstand temperatures above + 300 deg C or below -50 deg c.

替代本標準的新標準

SN EN ISO 898-5:2012

等同采用的國際標準

UNI EN ISO 898-5:2012 - Identical

NEN EN ISO 898-5:2012 - Identical

SS EN ISO 898-5 Ed. 2 (2012) - Identical

NF EN ISO 898-5:1998 - Identical

NBN EN ISO 898-5:1998 - Identical

UNI EN ISO 898-5:2000 - Identical

I.S. EN ISO 898-5:1999 - Identical

NS EN ISO 898-5 Ed. 1 (1999) - Identical

UNE EN ISO 898-5:1999 - Identical