當前位置： 首頁 > 標準詳情頁

IEC 60426 Ed. 2.0現(xiàn)行

Electrical insulating materials - Determination of electrolytic corrosion caused by insulating materials - Test methods

出版：International Electrotechnical Committee

獲取原文如何獲取原文？問客服獲取原文，即可享受本標準狀態(tài)變更提醒服務！

專家解讀視頻

基本信息

標準編號： IEC 60426 Ed. 2.0

發(fā)布時間：2007/1/29 0:00:00

標準類別：Standard

出版單位：International Electrotechnical Committee

標準頁數(shù)：54

標準簡介

Determines the ability of insulating materials to produce electrolytic corrosion on metals being in contact with them under the influence of electric stress, high humidity and elevated temperature. The effect of electrolytic corrosion is assessed in one test by using consecutively two methods: - visual semi-quantitative method consisting in comparing visually the corrosion appearing on the anode and cathode metal strips, with those given in the reference figures. This method consists of the direct visual assessment of the degree of corrosion of two copper strips, acting as anode and cathode respectively, placed in contact with the tested insulating material under a d.c. potential difference at specified environmental conditions. The degree of corrosion is assessed by visually comparing the corrosion marks on the anode and cathode metal strips with those shown in the reference figures; - quantitative method, which involves the tensile strength measurement, carried out on the same anode and cathode metal strips after visual inspection. An additional quantitative test method for determining electrolytic corrosion, which involves tensile strength measurement of copper wire, is described in the informative Annex C. The main changes with respect to the previous edition are listed below: - experience has indicated the need for improved description of the experimental method. It describes a revised procedure for the visual and tensile strength test method that overcomes the limitations of the first edition; - one older method of the first edition has partly been maintained in the informative annex.

本標準替代的舊標準

IEC 60426 Ed. 1.0

等同采用的國際標準

AS 3532-1988 - Identical

NFC 26 260:1974 - Identical

UNE 21362:1978 - Identical

SS IEC 426 Ed. 1 (1982) - Identical

CEI EN 60426 Ed. 1 (2007) - Identical

BS EN 60426:2007 - Identical

DIN EN 60426 (2007-11) - Identical

I.S. EN 60426:2007 - Identical

VDE 0303-6:2007 - Identical