IEC 61034-2 Ed. 3.0現行
Measurement of smoke density of cables burning under defined conditions Part 2: Test procedure and requirements
出版：International Electrotechnical Committee
專家解讀視頻
Provides details of the test procedure to be employed for the measurement of the density of smoke emitted from cables burning under defined conditions. It describes the means of preparing and assembling cables for test, the method of burning the cables, and gives recommended requirements for evaluating test results. The principal changes with respect to the previous edition are as follows: a) inclusion of cables down to 1 mm diameter; b) inclusion of non-circular cables; c) addition of guidance on testing cables above 80 mm diameter; d) delineation of elements of the test report; e) addition of guidance on the calculation for other parameters for fire safety engineering purposes; f) removal of minor differences with equivalent CENELEC work to allow parallel voting with that body. Has the status of a group safety publication in accordance with IEC Guide 104. The contents of the corrigendum of September 2006 have been included in this copy.
I.S. EN 61034-2:2005 - Identical
NF EN 61034-2:2005 - Identical
OVE/ONORM EN 61034-2:2006 - Identical
PN EN 61034-2:2006 - Identical
NEN EN IEC 61034-2:2006 - Identical
SS EN 61034-2 Ed. 1 (2005) - Identical
UNE EN 61034-2:2005 - Identical
VDE 0482-1034-2:2006 - Identical
DIN EN 61034-2 (2006-03) - Identical
BS EN 61034-2:2005 - Identical
CEI EN 61034-2 Ed. 2 (2006) - Identical
UNE 21172-2:1993 - Identical
AS/NZS 1660.5.2:2006 - Modified
