ISO 1119 : 2011(R2017)現行
GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - SERIES OF CONICAL TAPERS AND TAPER ANGLES
出版：International Organization for Standardization
專家解讀視頻
Gives calculated values for a series of cones or conical tapers, ranging from 120 degrees to less than 1 degree, or ratios from 1:0,289 to 1:500, intended for general use in technical engineering.
PN EN ISO 1119 : 2012 - Identical
DS EN ISO 1119 : 2012 - Identical
BIS IS 3458 : 2001 - Identical
IS 3458 : 2018 - Identical
NEN ISO 1119 : 1998 - Identical
NBR ISO 1119 : 2014 - Identical
NS 1435 : 1ED 1976 - Identical
