ISO 2983:1975廢止
Rolling Bearings - Locknuts, Wide Series And Lockwashers With Bent Inner Tab
出版：International Organization for Standardization
專家解讀視頻
Specifies tolerances and dimensions for: two types of lockwashers with bent inner tab (type A with the tab bent outwards from the nut and type B with the tab bent in under the nut) and wide serieslocknuts for axial location of bearing inner rings on shafts where nuts wider than those specified in ISO 2982 are required.
PN ISO 2983 : 1996 - Identical
UNE 18035 : 1980 - Identical
BS 5646-2(1978) : 1978 - Identical
UNI ISO 2983 : 1989 - Identical
UNI ISO 2983 : 1989 - Identical
BS 5646-2(1978) : 1978 - Identical
PN ISO 2983 : 1996 - Identical
UNE 18035 : 1980 - Identical
ABMA 7 : 1995 - Corresponds
UNE 18035:1980 - Identical
JIS B 1554:2005 - Equivalent
UNI ISO 2983:1989 - Identical
BS 5646-2:1978 - Identical
PN ISO 2983:1996 - Identical
UNE 18036:1978 - Identical
