国产精品久久久在线观看_亚洲免费观看视频网站_国产盗摄视频一区二区三区_久久久国产一级 - 日本在线观看一区

歡迎來到寰標網! 客服QQ:772084082 加入會員
當前位置: 首頁 > 標準詳情頁

IEC 60068-2-2 Ed. 5.0現行

Environmental testing Part 2-2: Tests - Test B: Dry heat

出版:International Electrotechnical Committee

獲取原文 如何獲取原文?問客服 獲取原文,即可享受本標準狀態變更提醒服務!

專家解讀視頻

基本信息
標準編號: IEC 60068-2-2 Ed. 5.0
發布時間:2007/7/16 0:00:00
標準類別:Standard
出版單位:International Electrotechnical Committee
標準頁數:29
標準簡介

IEC 60068-2-2:2007 Deals with dry heat tests applicable both to heat-dissipating and non heat-dissipating specimens. For non heat-dissipating specimens, Tests Bb and Bd do not deviate essentially from earlier issues. The object of the dry heat test is limited to the determination of the ability of components, equipment or other articles to be used, transported or stored at high temperature. These dry heat tests do not enable the ability of specimens to withstand or operate during the temperature variations to be assessed. In this case, it would be necessary to use IEC 60068-2-14 Test N: Change of temperature. The dry heat tests are subdivided as follows: - Dry heat test for non heat-dissipating specimens with gradual change of temperature, Bb. - Dry heat tests for heat-dissipating specimens with gradual change of temperature, Bd; with gradual change of temperature, specimen powered throughout, Be. The procedures given in this standard are normally intended for specimens that achieve temperature stability during the performance of the test procedure. The main changes from the previous edition are as follows: Tests Ba and Bc have been deleted since they were more severe tests than Test Nb, IEC 60068-2-14: Change of temperature. Secondly it was considered justified to delete the 3 % value on the temperature difference between the chamber air and the wall temperatures. Thirdly it is proposed that the test specimen be powered throughout the test where required; and, finally, the annexes have been removed. It has the status of a horizontal standard in accordance with IEC Guide 104

本標準替代的舊標準

IEC 60068-2-2 Ed. 4.0

等同采用的國際標準

SEN 43 16 02:1976 - Identical

AS 1099.2Bd-1980 - Equivalent

BS 2011-2.1B:1977 - Identical

SS EN 60068 Ed. 3 (2000) - Identical

AS 60068.2.2-2003 - Identical

UNE 20501-2-2:1978 - Identical

JIS C 8938:1995 - Identical

ONORM OVE EN 60068-2-2:1993 - Identical

UNE EN 60068-2-2:2008 - Identical

DIN EN 60068-2-2 (1994-08) - Identical

DIN IEC 60068-2-2 (1980-03) - Identical

HD 323.2.2:1976 - Identical

I.S. EN 60068-2-2:2007 - Identical

SS EN 60068-2-2 Ed. 2 (2007) - Identical

NEN 10068-2-2:1977 - Identical

NBN C 83 355-4:1985 - Identical

CEI EN 60068-2-2 Ed. 2 (2008) - Identical

JIS C 60068-2-53:1997 - Identical

NFC 20 702:1987 - Identical

SS EN 60068-2-2:2001 - Identical

NF EN 60068-2-2:1993 - Identical

NBN C 86 010:1984 - Identical

NBN C 83 100:1984 - Identical

NF EN 60068-2-2:2007 - Identical

NBN C 83 300:1985 - Identical

DIN EN 60068-2-2 (2008-05) - Identical

VDE 0468-2-2:2008 - Identical

OVE/ONORM EN 60068-2-2:2008 - Identical

PN EN 60068-2-2:2007 - Identical

NEN EN IEC 60068-2-2:2007 - Identical

BS EN 60068-2-2:2007 - Identical

CEI EN 60068-2-2 Ed. 1 (1998) - Identical

JIS C 60068-2-2:1995 - Identical

SN EN 60068-2-2:1993 - Identical

NBN C 83 255:1984 - Identical

UNE EN 60068-2-2:1997 - Identical