The main purpose of this standard is to provide requirements for acceptance inspection of electron beam welding machines preferably when first installed on the user's premises. This standard can (in full or in part) be referred to in contracts for supply of electron beam welding machines. Further tests are not normally required if proof of satisfactory welding results is provided in the form of routine inspection documentation. However, the requirements of the standard can also be used for inspection as part of maintenance, if required by contract.If modifications are made to an electron beam welding machine (rebuilding, repairs, modification to the operating conditions etc.) such as may have an effect on the acceptance inspection, repeat tests can be necessary covering the machine parameters affected by such modifications.If a welding machine that has already been accepted is dismantled (e.g. in order to change its location), such tests would involve verification according to the requirements in clauses 4, 6.2 to 6.4 and 7.

ISO 14744-1:2008

NEN EN ISO 14744-1:2000 - Identical

SS EN ISO 14744-1 Ed. 1 (2000) - Identical

BS EN ISO 14744-1:2001 - Identical

DIN EN ISO 14744-1 (2000-07) - Identical

ONORM EN ISO 14744-1:2000 - Identical

NBN EN ISO 14744-1 Ed. 1 (2000) - Identical

UNI EN ISO 14744-1:2001 - Identical

SN EN ISO 14744-1:2000 - Identical

I.S. EN ISO 14744-1:2000 - Identical

NS EN ISO 14744-1 Ed. 1 (2000) - Identical

PN EN ISO 14744-1:2002 - Identical

UNE EN ISO 14744-1:2001 - Identical