當前位置： 首頁 > 標準詳情頁

AS 1100.201-1992 (R2014)現行

Technical drawing Mechanical engineering drawing

出版：Standards Australia

獲取原文如何獲取原文？問客服獲取原文，即可享受本標準狀態變更提醒服務！

專家解讀視頻

基本信息

標準編號： AS 1100.201-1992 (R2014)

發布時間：1992/11/16 0:00:00

標準類別：Standard

出版單位：Standards Australia

標準頁數：71

標準簡介

Sets out recommendations for mechanical engineering drawing practice. Provides information on surface texture and welding, and the simplified representation of pipelines. Provides details on springs, gears, splines, rolling element bearings, seals and knurling. Appendices provide guidance on the tolerance of machined components and castings.RECONFIRMATION NOTICETechnical Committee ME-072 has reviewed the content of this publication and in accordance with Standards Australia procedures for reconfirmation, it has been determined that the publication is still valid and does not require change.Certain documents referenced in the publication may have been amended since the original date of publication. Users are advised to ensure that they are using the latest versions of such documents as appropriate, unless advised otherwise in this Reconfirmation Notice.Approved for reconfirmation in accordance with Standards Australia procedures for reconfirmation on 6 December 2013.The following are represented on Technical Committee ME-072:Australian Institute of ArchitectsBuilding Designers Association of NSWDesign Association of New ZealandDepartment of Defence (Australia)Department of Education , Training and Employment (South Australia)Engineers AustraliaMaster Builders AustraliaTAFE NSWThe University of AdelaideThe University of New South WalesUniversity of South Australia

標準備注

See also HB 1, HB 3, HB 6
Reconfirmed 20/01/2014.
This standard has been reconfirmed in Australia in 2014 and remains current in New Zealand.

本標準替代的舊標準

等同采用的國際標準

ISO 128:1982 - Identical

ISO 5459:1981 - Identical

ISO 5455:1979 - Identical

ISO 406:1987 - Identical