This part of ISO 8636 specifies, with reference to ISO 230-1 and ISO 230-2, geometric tests, machining tests and tests for checking accuracy and repeatability of positioning of numerically controlled axes for general purpose, normal accuracy, bridge-type milling machines with a fixed bridge (portal type). This part of ISO 8636 also specifies the applicable tolerances corresponding to the above-mentioned tests.This part of ISO 8636 is applicable to machines with moving tables and fixed double columns. It does not include single-column (open sided) machines and those with fixed tables and moving columns.This part of ISO 8636 deals only with the verification of the accuracy of the machine. It does not apply to the testing of the machine operation (vibration, abnormal noise, stick-slip motion of components, etc.) nor to machine characteristics (such as speeds, feeds, etc.), which should generally be checked before testing the accuracy.This part of ISO 8636 provides the terminology used for the principal components of the machine and the designation of the axes with reference to ISO 841[1].NOTE In addition to terms used in the three official ISO languages (English, French and Russian), annex A of this part of ISO 8636 gives the equivalent terms in the German and Italian languages; these are published under the responsibility of the member bodies for Germany (DIN) and Italy (UNI). However, only the terms given in the official languages can be considered as ISO terms.

ISO 8636-1:1987

KS B ISO 8636-1:2014 - Identical

KS B ISO 8636-1:2012 - Identical

KS B ISO 8636-1:2003 - Identical

GB/T 19362.1-2003 - Identical

SN ISO 8636-1:2000 - Identical

NEN ISO 8636-1:2000 - Identical

JIS B 6228:2003 - Identical

NF ISO 8636-1:2000 - Identical

UNI ISO 8636-1:1990 - Identical

BS 4656-36:1987 - Equivalent

NFE 60 163:1988 - Equivalent

SS ISO 8636-1 Ed. 1 (2007) - Identical

UNE 15324-1:2004 - Identical