當前位置： 首頁 > 標準詳情頁

ISO 4759-1:2000現行

Tolerances for fasteners Part 1: Bolts, screws, studs and nuts - Product grades A, B and C

出版：International Organization for Standardization

獲取原文如何獲取原文？問客服獲取原文，即可享受本標準狀態變更提醒服務！

專家解讀視頻

基本信息

標準編號： ISO 4759-1:2000

發布時間：2000/11/9 0:00:00

標準類別：Standard

出版單位：International Organization for Standardization

標準頁數：58

標準簡介

This part of ISO 4759 specifies a selection of tolerances for bolts, screws, studs and nuts with ISO metric threads and with product grades A, B and C and for tapping screws with product grade A.NOTE The product grades refer to the size of the tolerances where grade A is the most precise and grade C is the least precise.The tolerances, except tolerances for threads, are selected from the system of limits and fits specified in ISO 286-1 and ISO 286-2. The tolerances for metric threads are taken from the series of tolerance classes specified in ISO 965-3. The tolerances for tapping screw threads are covered in ISO 1478.The tolerances of form and position are specified and indicated in accordance with ISO 1101, ISO 8015 and ISO 2692.The tolerances specified in this part of ISO 4759 apply to fasteners prior to coating unless otherwise specified. See also ISO 4042.Deviations from the tolerances specified in this part of ISO 4759 are only permitted in product standards where there are valid technical reasons. In cases where there is a difference between the tolerance requirements in this part of ISO 4759 and the product standard, the product standard takes precedence.It is recommended that these tolerances also be used for non-standard fasteners.Dimensions and tolerances given in this part of ISO 4759 are in millimetres.

本標準替代的舊標準

ISO 4759-1:1978

等同采用的國際標準

BIS IS 1367-2:2002 - Identical

NEN EN ISO 4759-1:2001 - Identical

AS 5066-2002 (R2016) - Identical

SS EN ISO 4759-1 Ed. 1 (2000) - Identical

BS 4929-1:1973 - Identical

PN EN ISO 4759-1:2004 - Identical

NS EN ISO 4759-1 Ed. 1 (2001) - Identical

I.S. EN ISO 4759-1:2000 - Identical

NBN E 27 073:1988 - Identical