MS ISO 7093-1:2006 (CONFIRMED:2011)現行
PLAIN WASHERS - LARGE SERIES - PART 1: PRODUCT GRADE A (ISO 7093-1:2000, IDT)
出版：馬來西亞標準局（DSM）
專家解讀視頻
This Malaysian Standard specifies the characteristics of large-series, product-grade-A plain washers in the 200 HV and 300 HV hardness classes and of nominal sizes (nominal thread diameters) ranging from 3 mm to 36 mm inclusive. Washers conforming to this Malaysian Standard are intended for use in cases where soft material pieces are to be clamped or where there are large clearance holes in the workpiece. Nevertheless, in the latter case, the suitability of the washer thickness should be checked. Washers of hardness class 200 HV are suitable for - hexagon bolts and screws of product grades A and B in property classes up to and including 8.8; - hexagon nuts of product grades A and B in property classes up to and including 8; - hexagon bolts, screws and nuts of stainless steel of similar chemical composition; - case-hardened thread rolling screws. Washers of hardness class 300 HV are suitable for - hexagon bolts and screws of product grades A and B in property classes up to and including 10.9; - hexagon nuts of product grades A and B in property classes up to and including 10. If dimensions other than those listed in this Malaysian Standard are required, they should be selected from those given in ISO 887.
等同采用ISO 7093-1:2000, Plain washers – Large series –Part 1: Product grade A
