ISO 2283:2000現行
Long shank taps with nominal diameters from M3 to M24 and 1/8 in to 1 in - Reduced shank taps
出版：International Organization for Standardization
專家解讀視頻
This International Standard specifies the dimensions for reduced shank taps with nominal diameters from M3 to M24 and 1/8 in to 1 in and thus complements ISO 8051 which concerns full-diameter shank taps.It applies to long shank machine taps.Technical specifications for taps covered by this International Standard (including marking) are given in ISO 8830.This International Standard is applicable to taps intended for cutting the following threads:a) ISO metric threads- coarse pitch;- fine pitch.b) ISO inch threads- "Unified Coarse" series (UNC) and "Unified Fine" series (UNF).The following non-recommended inch threads- "British Standard Whitworth" (BSW) and "British Standard Fine" (BSF);- "British Association" (BA) are given in Annex A.
AS 2181.1-1978 - Equivalent
SS ISO 2283 Ed. 1 (2000) - Identical
NS 5359 Ed. 1 (1976) - Similar
UNI 7649:1977 - Equivalent
BS 949-1:1992 - Equivalent
NBN EN 25967:1992 - Identical
GB/T 3464.2-2003 - Identical
BS 949-1:1976 - Equivalent
BS 949-2:1979 - Equivalent
NS 5362 Ed. 2 (1978) - Similar
AS 1722.2-1992 (R2017) - Identical
NS 5361 Ed. 2 (1978) - Similar
NS 5360 Ed. 1 (1976) - Similar
