當前位置： 首頁 > 標準詳情頁

NS EN ISO 14744-1 Ed. 2 (2008)現行

Welding - Acceptance Inspection Of Electron Beam Welding Machines - Part 1: Principles And Acceptance Conditions

出版：Norwegian Standards (Norges Standardiseringsforbund)

獲取原文如何獲取原文？問客服獲取原文，即可享受本標準狀態變更提醒服務！

專家解讀視頻

基本信息

標準編號： NS EN ISO 14744-1 Ed. 2 (2008)

發布時間：2008/9/1 0:00:00

標準類別：Standard

出版單位：Norwegian Standards (Norges Standardiseringsforbund)

標準頁數：16

標準簡介

Specifies requirements for acceptance inspection of electron beam welding machines preferably when first installed at the user's premises. This standard can be referred to (either in full or in part) in contracts for supply of electron beam welding machines. Further tests are normally not needed if proof of satisfactory welding results are provided in the form of routine inspection documentation. However, if required by contract the requirements of the standard can be used also for inspection as part of maintenance.

本標準替代的舊標準

NS EN ISO 14744-1 Ed. 1 (2000)

等同采用的國際標準

NBN EN ISO 14744-1 Ed. 1 (2000) - Identical

UNI EN ISO 14744-1:2001 - Identical

I.S. EN ISO 14744-1:2000 - Identical

UNE EN ISO 14744-1:2001 - Identical

UNI EN ISO 14744-1:2009 - Identical

UNE EN ISO 14744-1:2009 - Identical

NBN EN ISO 14744-1:2008 - Identical

SS EN ISO 14744-1 Ed. 2 (2008) - Identical

SN EN ISO 14744-1:2008 - Identical