DIN EN 60317-23 (2000-10)現(xiàn)行
Specifications For Particular Types Of Winding Wires - Part 23: Solderable Polyesterimide Enamelled Round Copper Wire, Class 180
出版：German Institute for Standardisation (Deutsches Institut für Normung)
專(zhuān)家解讀視頻
Specifies the requirements of solderable enamelled round copper winding wire; class 180 with a sole coating based on polyesterimide resin, which may be modified providing it retains the chemical identity of the original resin and meet all specific wire requirements. Class 180 is a thermal class requiring a minimum temperature index of 180 and a heat shock temperature of at least 200 degrees C. The temperature in degrees Celsius that corresponds to the temperature index is not necessarily that at which it is recommended that the wire be operated and this depends on several factors, including the type of equipment involved. Covers nominal conductor diameters: Grade 1:0,020 mm up to and including 1,600 mm and Grade 2:0,020 mm up to and including 1,600 mm.
DRAFT 2013 issued in July 2013. (08/2013)
UNE EN 60317-23:2014 - Identical
NF EN 60317-23:2014 - Identical
SS EN 60317-23 Ed. 2 (2014) - Identical
NBN EN 60317-23:2014 - Identical
I.S. EN 60317-23:1996 - Identical
NF EN 60317-23:1995 - Identical
SS EN 60317-23:1998 - Identical
UNE EN 60317-23:1995 - Identical
SN EN 60317-23:1995 - Identical
BS EN 60317-23:1996 - Identical
ONORM EN 60317-23:1995 - Identical
NBN EN 60317-23:1995 - Identical
IEC 60317-23 Ed. 2.2 - Equivalent
