當前位置： 首頁 > 標準詳情頁

SS EN 12373-3 Ed. 1 (1999)被替代

Aluminium And Aluminium Alloys - Anodizing - Part 3: Determination Of Thickness Of Anodic Oxidation Coatings - Non-destructive Measurement By Split-beam Microscope

出版：Standardiserings-Kommissionen I Sverige

獲取原文如何獲取原文？問客服獲取原文，即可享受本標準狀態(tài)變更提醒服務！

專家解讀視頻

基本信息

標準編號： SS EN 12373-3 Ed. 1 (1999)

發(fā)布時間：1999/5/28 0:00:00

標準類別：Standard

出版單位：Standardiserings-Kommissionen I Sverige

標準頁數(shù)：9

標準簡介

Defines a non-destructive method of determining the thickness of anodic oxidation coatings on aluminium and its alloys using a split-beam microscope. Applicable in most industrial cases, to anodic oxidation coatings above 10 m, or above 5 m when the surface is smooth. This is limited by the need for the two luminous lines described in clause 3 to be visible and distinctly separated, i.e. not in the case of opaque or dark-coloured coatings.

標準備注

Supersedes SS ISO 2128 (04/2000)

本標準替代的舊標準

SS ISO 2128:1984

替代本標準的新標準

SS EN ISO 2128 Ed. 1 (2010)

等同采用的國際標準

NEN EN 12373-3:1998 - Identical

UNE EN 12373-3:1999 - Identical

NS EN 12373-3 Ed. 1 (1999) - Identical

I.S. EN 12373-3:1999 - Identical

UNI EN 12373-3:2000 - Identical