ISO 14554-2:2000被替代
Quality requirements for welding - Resistance welding of metallic materials Part 2: Elementary quality requirements
出版：International Organization for Standardization
專家解讀視頻
This standard has been prepared such that:– it is independent of the type of welded construction to be manufactured;– it defines quality requirements for welding both in production plants and on site;- it provides guidance for describing a manufacturers capability to produce welded constructions to meet specified requirements;– it can also be used as a basis for assessing the manufacturer in respect to his welding capability.This standard is appropriate when demonstration of a manufacturers or a sub-contractor's capability to produce welded constructions, fulfilling specified quality requirements, are specified in one or more of the following:– a contract between involved parties; – an application standard; – a regulatory requirement.The requirements contained within this standard can be adopted in full or can be selectively deleted by the manufacturer if not applicable to the construction concerned. They provide a flexible framework for the control of welding in the following cases:– Case 1To provide specific requirements for resistance welding in contracts which require the manufacturer or sub-contractor to have a quality system other than EN ISO 9001 or EN ISO 9002 and where the documented welding control has a minor importance to the overall integrity of the final construction.– Case 2To provide specific requirements for resistance welding as guidance to a manufacturer or sub-contractor developing a quality system.– Case 3To provide specific requirements for references in application standards which use resistance welding as part of their requirements or in a contract between relevant parties.For general guidelines for selection and use see EN 729-1 with the exception of Annex B and under consideration that for resistance welding only comprehensive and elementary requirements are specified. Annex A in this standard applies for resistance welding.
NEN EN ISO 14554-2:2000 - Identical
SS EN ISO 14554-2 Ed. 1 (2000) - Identical
UNE EN ISO 14554-2:2000 - Identical
PN EN ISO 14554-2:2002 - Identical
NS EN ISO 14554-2 Ed. 1 (2000) - Identical
I.S. EN ISO 14554-2:2000 - Identical
UNI EN ISO 14554-2:2001 - Identical
NF EN ISO 14554-2:2000 - Identical
NBN EN ISO 14554-2:2000 - Identical
ONORM EN ISO 14554-2:2000 - Identical
DIN EN ISO 14554-2 (2000-07) - Identical
BS EN ISO 14554-2:2001 - Identical
SN EN ISO 14554-2:2000 - Identical
