當前位置： 首頁 > 標準詳情頁

ISO 4190-1:1999被替代

Lift (US: Elevator) installation Part 1: Class I, II, III and VI lifts

出版：International Organization for Standardization

獲取原文如何獲取原文？問客服獲取原文，即可享受本標準狀態變更提醒服務！

專家解讀視頻

基本信息

標準編號： ISO 4190-1:1999

發布時間：1999/8/12 0:00:00

標準類別：Standard

出版單位：International Organization for Standardization

標準頁數：19

標準簡介

This part of ISO 4190 specifies the necessary dimensions to permit the installation of passenger lifts of classes I, II, III and VI as defined in 2.2.The dimensions given reflect the requirements for the apparatus. Due note should be made of national regulations which may demand greater dimensions in some instances.This part of ISO 4190 is applicable to all new lift installations, irrespective of drive systems, with a car with one entrance, to be installed in a new building. Where relevant, it may be used as a basis for an installation in an existing building.It does not cover lifts whose the speed is higher than 6,0 m/s: manufacturers should be consulted for such installations.

本標準替代的舊標準

ISO 4190-1:1990

NS 3800 Ed. 1 (1982)

替代本標準的新標準

ISO 4190-1:2010

等同采用的國際標準

KS B ISO 4190-1:2002 - Identical

BS 5655-5:1981 - Similar

SS 76 35 20 Ed. 1 (1984) - Identical

BS ISO 4190-1:1999 - Identical

NF ISO 4190-1:2004 - Identical

DIN 15309 (2002-12) - Identical