IEC 60512-9-3 Ed. 2.0現(xiàn)行
Connectors for electronic equipment - Tests and measurements Part 9-3: Endurance tests - Test 9c: Mechanical operation (engaging and separating) with electrical load
出版：International Electrotechnical Committee
專家解讀視頻
IEC 60512-9-3:2011 defines a standard test method to assess the mechanical and electrical operational endurance, i.e. engaging and separating cycles, of a connector in an operating mode which includes a specified electrical load. This second edition cancels and replaces Test 9c of IEC 60512-5, issued in 1992, and constitutes a technical revision. The main technical changes with regard to the previous edition are as follows: - An additional requirement to 4.1 stating that if more than one electrical circuit is wired for testing, the wiring shall be carried out in a parallel electrical circuit. - Subclauses 4.3 through 4.7 were removed and replaced by 4.2 through 4.4. This publication is to be read in conjunction with IEC 60512-1:2001 and IEC 60512-1-100:2006.
BS EN 60512-9-3:2011 - Identical
