Gives the requirements for three types of non-heat shrinkable sleeving, extruded from PVC. Sleeving of this type is normally available with an internal diameter up to 50 mm and in a range of wall thicknesses between 0,2 mm and 1,8 mm. Each sheet covers up to three levels of wall thickness, 'thin wall', 'standard wall' and 'thick wall' related to nominal internal diameter and with corresponding differences in requirements for breakdown voltage. Sheets 100 and 103 cover sleeving having a temperature range of -10 degree C to 90 degree C. Sheets 101 and 104 cover sleeving having a temperature range of -10 degree C to 105 degree C. Sheets 102 and 105 cover sleeving having a temperature range of -40 degree C to 70 degree C.

VDE 0341-3-100 TO 105 : 2002 - Identical

UNE EN 60684-3-100 TO 105 : 2002 - Identical

EN 60684-3-100 TO 105 : 2001 - Identical

HD 523.3.100-105 : 200S1 - Identical

DIN EN 60684-3-100 TO 105 : 2002 - Identical

BS 6893-3.100 TO 105(1995) : 1995 - Identical

NFC 1993 643 100 : 1993 - Identical

SN EN 60684-3-100 TO 105 : 2001 - Identical

CEI EN 60684-3-100 TO 105 : 2ED 2002 - Identical

PN EN 60684-3-100 TO 105 : 2002 - Identical

NF EN 60684 3 100 TO 105 : 2003 - Identical

DS EN 60684-3-100 TO 105 : 2001 - Identical

DIN IEC 60684-3-100 TO 105 : 1996 - Identical

CEI 15-70 : 1ED 1997 - Identical

UNE 21375-3-100/105 : 1993 - Identical

NEN EN IEC 60684-3-100 TO 105 : 2001 - Identical

I.S. EN 60684-3-100 TO 105:2001 - Identical

UNE EN 60684-3-100 TO 105 : 2002 - Identical

EN 60684-3-100 TO 105 : 2001 - Identical

PN EN 60684-3-100 TO 105 : 2002 - Identical

NEN EN IEC 60684-3-100 TO 105 : 2001 - Identical

DS EN 60684-3-100 TO 105 : 2001 - Identical

SN EN 60684-3-100 TO 105 : 2001 - Identical

CEI EN 60684-3-100 TO 105 : 2ED 2002 - Identical

NFC 1993 643 100 : 1993 - Identical

NF EN 60684 3 100 TO 105 : 2003 - Identical