當前位置： 首頁 > 標準詳情頁

IEC 61010-031 Ed. 1.0被替代

Safety requirements for electrical equipment for measurement, control and laboratory use Part 031: Safety requirements for hand-held probe assemblies for electrical measurement and test

出版：International Electrotechnical Committee

獲取原文如何獲取原文？問客服獲取原文，即可享受本標準狀態(tài)變更提醒服務(wù)！

專家解讀視頻

基本信息

標準編號： IEC 61010-031 Ed. 1.0

發(fā)布時間：2002/1/10 0:00:00

標準類別：Standard

出版單位：International Electrotechnical Committee

標準頁數(shù)：121

標準簡介

Deals with the safety of hand-held and hand-manipulated probe assemblies. They are for use in the interface between an electrical phenomenon and test or measurement equipment. Three main types are described: (A) Low-voltage and high-voltage, non-attenuating probe assemblies. For voltages less lthan 63 kV. They do not incorporate active components. (B) High-voltage attenuating or divider probe assemblies. For voltages less than 63 kV. They incorporate a divider function. (C) Low voltage attenuating or divider probe assemblies. For voltages less than 1 kV r.m.s or 1,5 kV d.c. They incorporate a signal conditioning function. It has the status of a group safety publication in accordance with IEC Guide 104.

本標準替代的舊標準

IEC 61010-2-031 Ed. 1.0

替代本標準的新標準

IEC 61010-031 Ed. 1.1

IEC 61010-031 Ed. 2.0

等同采用的國際標準

OVE/ONORM EN 61010-031:2003 - Identical

NEN EN IEC 61010-031:2002 - Identical

AS 61010.031-2004 (R2016) - Identical

PN EN 61010-031:2005 - Identical

UNE EN 61010-031:2004 - Identical

I.S. EN 61010-031:2002 - Identical