Hand-held non-electric power tools driven by linear or rotary motors, powered by compressed air, hydraulic fluid and intended to be used by one operator and supported by the operator's hand or hands; or suspension,e.g. a balancer are applicable in this standard. Power tools covered: circular saws, circular knives; jig saws; power hack saws; oscillating saws, oscillating knives (windshield knives); and reciprocating saws. Applicable to: circular saws with saw blades with a diameter of 65 mm or less; circular saws with diamond cutting-off wheels with diameters of 65 mm or less and a maximum cutting depth of 10mm; and oscillating saws having a saw blade with a radius of 50mm or less or a diamond cutting-off blade with a radius of 100 mm or less.

2000 Edition Re-issued in December 2008 & incorporates AMD 1 2008. (01/2009)

SN EN ISO 11148-12:2013

NBN EN 792-12:2000 - Identical

NF EN 792-12:2000 - Identical

UNI EN 792-12:2002 - Identical

I.S. EN 792-12:2000 - Identical

NS EN 792-12:2000 - Identical

UNE EN 792-12:2001 - Identical

SS EN 792-12:2000 - Identical

NEN EN 792-12:2000 - Identical

DIN EN 792-12 (2009-12) - Identical

ONORM EN 792-12:2009 - Identical

UNI EN 792-12:2009 - Identical

BS EN 792-12:2000+A1:2008 - Identical

DIN EN 792-12 (2001-02) - Identical

ONORM EN 792-12:2000 - Identical